B?HLER FOX E 308 H不銹鋼焊條

Description
Rutile-basic coated, core wire alloyed electrode for the use of high temperature CrNi austenitic
steel for service temperatures up to +700 °C. Specially designed for the base metal AISI 304H
(W. no. 1.4948). Controlled ferrite content of 3-8 FN. The deposit is insusceptible to embrittle-
ment and scaling. Excellent weldability in all position except vertical down.
Approvals and Certificates
UDT, SEPROZ
Same Alloy/Similar Alloy Filler metals
SMAW stick electrode: FOX CN 18/11 GMAW flux cored wire: E 308 H-FD
GTAW rod: ER 308 H-IG E 308 H PW-FD
CN 18/11-IG SAW combination: CN 18/11-UP/BB 202
GMAW solid wire: CN 18/11-IG
base Materials
similar alloyed creep resistant steels
1.4948 X6CrNi18-11, 1.4878 X12CrNiTi18-9
AISI 304, 304H, 321H, 347H
Operating Data
re-drying if necessary: ? mm L mm amps A
120 - 200 °C, min. 2 h 2.5 300 45 - 175
electrode identification: 3.2 350 70 - 110
FOX E 308 H-16 E 19 9 H R 4.0 350 110 - 145
Preheating is not required, only in case of wall thickness above 25 mm preheat up to 150 °C,
Interpass temperature should not exceed 200 °C.
Mechanical Properties of All-weld metal
(*) u
yield strength R e N/mm 2 : 420 (≥ 350)
tensile strength R m N/mm 2 : 580 (≥ 550)
elongation A (L 0 = 5d 0 ) %: 40 (≥ 335)
impact work ISO-V KV J + 20 °C: 75 (≥ 347)
(*)  u untreated, as-welded
Typical Composition of All-weld metal
C Si Mn Cr Ni Mo FN
wt-% 0.05 0.6 0.7 19.4 10.4 0.2 3-8